All fresh air conditioning ducted air supplyperformance

1. Industrial air conditioning air supply can be made according to customer requirements, suitable for all kinds of mechanical equipment supporting models; when using, attention should be paid to shorten the long pipe of the air supply pipe as much as possible to avoid excessive cooling loss and waste.

2. The system is optimized and designed, and the equipment has high energy efficiency ratio;

3. Compared with similar products, the long-range design has the characteristics of low energy consumption and long air supply distance;

4, a variety of defrosting methods to choose from, defrosting time is short, the effect is good; provide micro-pressure difference controller options, intelligent control of defrosting frequency, so that there is frost, no frost does not melt, and the current commonly used timing fixed frequency defrosting compared to, can reduce the temperature rise caused by defrosting and save defrosting energy consumption;

5. Provide different shell materials: steel plate spray, stainless steel, rust-proof aluminum alloy; anti-oxidation gas shielded welding process, high cleanliness in the system;

6. The coil is arranged in a novel way to reduce the wind side resistance, the contact thermal resistance is small, and the heat transfer efficiency is high;

7, the fan motor used, moisture resistance, low temperature resistance, large air volume, low noise, stable and reliable operation;

The power consumption of industrial air conditioners is generally large, generally using 3N~ 380V 50Hz power supply. Industrial air conditioners are generally designed to operate 24 hours a day and throughout the year, with a service life of more than 10 years. Therefore, the main components of industrial air conditioners, such as compressors, condensers, throttle devices, evaporators, fans, motors, electrical components, etc., are all products with high performance and reliability.

9. In terms of manufacturing process, industrial air conditioners generally adopt all-steel sheet metal structure plus panel electrostatic spraying paint treatment. It has high corrosion resistance. Industrial air conditioners must be tested before they leave the factory. After successful debugging, they must meet the design requirements.

Overview of all-in-one air conditioner

The installation and use of civil air conditioners (split type) and central air conditioners (end pipes) seen in daily life are more complicated, and their effects make the human body comfortable at 20-30℃. Zhonggao air conditioner is applied in the following production processes:

1. The air temperature is required to be lower than 15 degrees Celsius. The fresh air temperature of Zhonggao industrial air conditioner is 0-25 degrees Celsius. The circulating air temperature is minus 20 degrees Celsius.

2, when the user needs low temperature dry air to cool and dehumidify the product, such as ambient fresh air temperature 25℃, humidity 85%; industrial air conditioning outlet temperature 20℃, humidity 45%.

3. The whole machine adopts integrated structure, and is equipped with casters for easy movement, easy to install and use.

4, industrial air conditioning is mostly the use of ducted air, cold air can be arbitrarily transported to the cooling section, and the fan selection of large air volume high pressure.

5, the ambient temperature is higher than 45 degrees above ordinary air conditioning can not be normal refrigeration, high temperature air conditioning, in the ambient temperature of 65℃.

Application offresh air conditioner

Zhonggao brand industrial air conditioner can be used for various types of refrigeration engineering, cooling, refrigeration, dehumidification and other technical local cooling. Industrial air conditioning is suitable for the following: Industrial air conditioning produces low-temperature refrigeration equipment, which is widely used in photoelectric technology, plastics, electronic products, machinery and equipment cooling. Such as VU curing, exposure machine, printing machine, food drying, inflatable model, tent room, steel box girder or cabin welding, low temperature storage, etc. Rapid cooling can greatly shorten the cycle time, thereby improving production efficiency and product quality. Especially in some places where the ambient temperature is high and the dust is more.